A state of art facility on Computer aided design(CAD) of Electric Machines with special emphasis of Power Electronic(PE) Applications is created in the Electrical Engineering Department of IIT Delhi under NAMPET program funded by the Ministry of IT, Govt. of India. World renowned CAD softwares of Infolytica, Canada (MagNet, Motorsolve) and SPEED Laboratories, UK (SPEED, FLUX, MotorCAD) are installed. This short term course is aimed at training the participants on these softwares and familiarize them on the related fundamental concepts. At the end of the course the participants, drawn from academia and industry will be able to design machines for specific applications in their organizations and enhance their capacity in Research, Design, product development and education. With expanding PE applications Electric Machine designs have undergone sea change and engineers must be equipped to face new challenges in designing Electric Drives and Energy conversion systems including renewable energy and energy efficiency.

The Fifth National Workshop on Power Electronics (NWPE 2009) for Industry-Institute-R&D interaction under the aegis of NaMPET was organized by CDAC Thiruvananthapuram on 22nd - 23rd October 2009. Technology showcase under NaMPET and Green Power were the core theme of NWPE-2009. The lectures and presentations by eminent personalities covered futuristic trends and developments in Power Electronics. 160 participants from various industries, institutes and R&D centers attended the workshop.

View Report

A Short-Term Course on - Power Quality and Energy Management Perspectives in Indian Industries was organised by Department of Electrical and Electronics Engineering, COIMBATORE INSTITUTE OF TECHNOLOGY under the aegis of National Mission on Power Electronics Technology (NaMPET).
The event is jointly organised with CDAC Thiruvanthapuram..

A Short-Term Course on - Power Electronics under the aegis of NaMPET (National Mission on Power Electronics Technology) was organised by Department of Electrical Engineering, BESU, Shibpur and IEEE IAS Calcutta Chapter.

PeCool - A Short-Term Course on Thermal Design and Engineering for Power Electronics Systems was organised under the aegis of National Mission on Power Electronics Technology (NaMPET).
The event was jointly organised by IEEE Kerala Section and Degree Control Inc.

View Report

The first Workshop on Power Electronics Education (WPEE) under the aegis of the National Mission on Power Electronics Technology (NaMPET) was organized by the Department of Electrical & Electronics Engineering, National Institute of Technology, Tiruchirappalli (NITT), during 22^nd - 23^rd January 2009. Eighteen delegates actively involved in teaching Power Electronics and associated subjects at under-graduate or post-graduate level from various academic institutions participated in this two-day workshop.

View Report

A short term course on EMI/EMC was organized by CDAC, Thiruvananthapuram on 5th December 2008.
75 participants from CDAC(T) with 2 speakers from VSSC Trivandrum who have good exposure on real life issues on EMI problem solving and EMC design are the faculty for the course.The technical sessions was followed by lab visit at VSSC

View Report

A short term course on SEQUEL Conducted at CDAC, Trivandrum, Kerala from 26^th - 28 ^th November, 2008 . 40 engineers from CDAC(T) participated. Prof M B Patil and Dr Sawant, IITB, Mumbai have taken the class followed by a lab session. SEQUEL with GUI distributed among participants.

View Report

National workshop on Power Electronics (NWPE 2008) was held from 12^th - 14^th of November 2008
at NIT Trichy.

View Report

A short term course on "Power Electronics and Digital techniques in Electric utility applications." Conducted at College of Engineering, Perumon,Kerala from 07^th - 13^th July, 2008. 50 participants with 11 speakers from various academic institutions and R&D centres.

View Report

CAN in Automation (CiA), Germany and Power Electronics Group, C-DAC, Thiruvananthapuram jointly organized a one day seminar on Controller Area Networking (CAN) and CAN based Application protocol namely, CANOpen on 7th July 2008.

View Report

View Report

Third National Workshop on Power Electronics-NWPE 2007 was held on 6^th& 7^th of September 2007 at IIT-Bombay, Mumbai.

View Report

One day seminar on CAN by Mr.Zeltwanger of CiA (CAN in Automation) and C-DAC(T) at C-DAC, Thiruvananthapuram on 23^rd June 2007.
CAN Presentation by C-DAC(T)

A Short term course on Electromagnetic Interference and Compatibility was organised by Anna University, Chennai at College of Engineering, Anna University, Chennai from 2^nd - 4^th May, 2007.

View Report

Tutorial on Active Filters for Power Quality under the aegis of NaMPET was held at C-DAC, Thiruvananthapuram on 16^th and 17^th March, 2007. This was organized by C-DAC, Thiruvananthapuram. The Tutorial covers the technology behind power quality solutions, design and engineering challenges associated with it. 30 delegates from various Industries and Academic Institutions participated in the course The faculty for this course had been from Dept of Electrical Engineering, IISc, Bangalore and C-DAC ( T ).

View Report

A Short-term course on FPGA Real Time Controller and Simulator was organised by IISc,Bangalore & CDAC(T) at Indian Institute of Science,Bangalore from 5^th-14^th March 2007.

View Report

The second National Workshop on Power Electronics (NWPE 2006) for Industry Institute interaction under the aegis of NaMPET was held at Indian Institute of Technology, Kanpur on 30^th, 31^st October - 1^st November 2006. This was organized by IIT Kanpur. Around 90 delegates from various Industries , Academic Institutions, and R&D centres participated in this programme.

View Report

A Short-term course on Simulation of Power Electronics Circuits and Systems under the aegis of NaMPET was held at IISc, Bangalore on 21^st –30^th August, 2006. The Course was jointly organized by IISc, Bangalore & C-DAC (T). The purpose of this short-term course is to share some of the developments with other educational institutions and design houses The course was conducted in three batches. 31 members from various R&D labs, Industries and Academic Institutions participated in the course The faculty for this course had been from Dept of Electrical Engineering, IISc, Bangalore.

View Report