| |
| |
| Home | |
| National PE Infrastructure Under NaMPET |
|
| NODAL CENTER, C-DAC (T) |
|
| |
|
Objective
Build up Infrastructure and test facilities to enable R&D in Machine drives, PQ equipments, Energy conversion systems, Electric Vehicles etc. Extend the facilities to PG and Ph.D students to enable advanced research. Extend the facilities to industries for their R&D work. Hands-on training to industries. Demonstrations / Display of R&D models developed through NaMPET funded projects.
|
|
| TOP▲ |
| |
|
|
| |
| High End Oscilloscopes |
 |
500 MHz, 5 GS/s,
Non-isolated
• Channel : 2
• Type : WR 6051A
• Make : LeCroy
Analysis Packages:
• Power Measurement & Analysis
• Jitter & Timing Analysis |
350 MHz, 5 GS/s,
Non-isolated
• Channel : 4
• Type : TDS 5034B
• Make : Tektronix
Analysis Packages:
• Power Measurement & Analysis
|
| |
|
| High End Oscilloscopes |
 |
200 MHz, 100 MS/s,
Non-isolated
• Channel : 4
• Type : TDS 420A
• Make : Tektronix
100 MHz, 500 MS/s, Isolated
• Channel : 2
• Type : THS 720P
• Make : Tektronix
|
Functions
• Harmonics Analysis
|
| |
|
| Oscilloscopes |
 |
600 MHz, 5-10 GS/s,
Non-isolated
• Channel : 4
• Type : DSO
• Make : LeCroy
• Model No : WR 64Xi
|
Analysis Packages:
• Power Measurement & Analysis
• Jitter & Timing Analysis
• CANbus TDM
• CANbus TD
|
| |
|
| Oscilloscopes |
 |
1 GHz
• Channel : 4+16
• Type : MSO
• Model : MSO4104
• Make : Tektronix
|
Analysis Packages:
• Power Measurement & Analysis
• CAN & LIN Serial Triggering & Analysis Module
• RS232/422/UART Serial Triggering & Analysis Module
•I2 C & SPI Serial Triggering Analysis Module
|
| |
|
| Oscilloscopes |
 |
100 MHz, 1 GS/s,
Isolated
• Channel : 4
• Type : DSO
• Model No. : TPS 2014
• Make : Tektronix
|
Functions
• Harmonics Analysis
• Power Waveform Analysis
|
| |
|
| Arbitrary Function generator |
 |
100 MHz
• Channel : 2
• Model No : AFG 310
• Make : Tektronix
|
|
| |
|
| Power Analyzer |
 |
Type : WT3000
Make : Yokogawa
Bandwidth : DC, 0.1 to 1 MHz
Functions
• Frequency Measurement
• Delta Calculation, LabView Driver
• Harmonic Measurement
• 20ch D/A Output, WT Viewer Software |
| |
|
| Thermal Data Monitoring System |
 |
TCM – 24
• Type : TCM-24
• Make : Degree Controls
• Sensor : Thermocouple
• Channels : 24
• Range : -150oC to +200oC
with accuracy of +1oC |
| |
|
| Automatic LCR Meter |
 |
Type : PM6306/561
Make : Fluke |
| |
|
| Electrical Loads |
 |
Non-Linear load
• 30 KVA for Non-Linear load
testing for UPS
Linear Load
• Linear Load 100 KW |
| |
|
| DC Electronic Load |
 |
• Model No:330x, 6063B
• Make: Agilent
• Rating: 150 - 1800W, 240V, 360A
• Modes of Operation: CC, CV, CR, CP Modes
|
| |
|
| DC Electronic Load |
 |
• Model No:63204
• Make: Chroma
• Rating: 5.5 kW, 500V, 100A
• Modes of Operation: CC, CV, CR, CP Modes
• Remote Controller: A632001
|
| |
|
| AC/DC Programmable Source with Analyzer |
 |
• Model: MX-30Pi-LF
• Make: CaliforniaInstruments
• Rating: 30 kVA
AC Output: Single/3-Phase-User Selectable
• HV Range: 0-300V (L-N),33.3ARMS /Ph
• LV Range: 0-150V (L-N),66.6A RMS / Ph
• Frequency: 16 to 500 Hz
DC Output:
• HV Range: 0-400V ,16.6A/Channel
• LV Range: 0-200V ,33.3A/Channel
|
|
|
| |
|
|
|
| TOP▲ |
| |
|
|
| |
| |
 |
• 400 Sq.m. area for testing and development of
power electronics equipments UPS,
STATCOM, UPQC,
HEV, AC Drives
and DC Drives.
• Loading capability of 500 KVA and dynamic
loading facility
upto 800 KVA. Different test
bays of 50 KVA, 100 KVA,
250 KVA,
500 KVA rating are available. |
| |
|
| Facilities & Equipments |
 |
Test bed and test setups for drives:
• 50 HP Induction Machines coupled to
separately
excited DC Motor.
• 22.5 KW slip recovery machine
two nos. direct-coupled.
• 10 KW test bed of Induction Motor,
Induction Generator,
DC Machine
and SR Motor.
• 10 KW eddy current loading mechanism.
Incremental and
Absolute Encoders for speed& position measurements. |
| |
|
| PE Development Systems |
 |
• 10 KVA with 50 KVA short term rated 2-level
inverter for
testing control of power quality
equipments.
• 10 KVA with 50 KVA short term rated 3-level
inverter for
high power STATCOM controller
development.
• Grid connected regenerative loading system
upto 250 KVA. |
| |
|
| Special Facilities |
 |
• 400V 100 AH battery bank for UPS
testing and developments.
• 100KVA 3-Ph Variac for varying the
input supply.
• 100 KVA Isolation Transformer |
|
|
| |
|
|
|
| TOP▲ |
| IISc, Bangalore |
|
| |
|
Objective
Provide a self-learning environment for the PG students at entry level. It will support 5 students at a time. Self-learning kits with all design and constructional details for the students.
|
| |
|
|
| |
Four Workbench Comprising of:
- Power Supply
- Function Generator
- Oscilloscope
- Multimeters.
- Soldering Station
- Constructional Project Kits
|
|
|
| |
|
|
|
| TOP▲ |
| IIT, Bombay |
|
| |
|
Objective
Strengthen the expertise in the area of Power Electronics Drives and Permanent Magnet Machines.Provide necessary facilities for design, testing, fabrication and prototyping of machines.Undertake projects in Machines and Drives.
|
| |
|
|
| |
Instruments:
- Digital Power Scope
- High-end Oscilloscope
- Power Analyzer
- UG/PG Modules
|
Development Platforms:
Flux Simulation Package:
Proto-Fabrication & Test facility:
|
|
|
| |
|
|
|
| TOP▲ |
| IIT, Kanpur |
|
| |
|
Objective
Undertake R&D and manpower training in the area of Power Systems Applications in Power Electronics. Provide hardware platform for the researchers to test new ideas. Impart hands-on training to students and practicing engineers.
|
| |
|
|
| |
Instruments:
- Frequency Response Analyzer
- Hand-held Power Analyzer
- Digital Storage Oscilloscope
|
Digital Control Platforms:
Power Modules:
- 3 Phase IGBT based Inverter Stack
Loading System:
|
|
|
| |
|
|
|
| TOP▲ |
| IIT, Kharagpur |
|
| |
|
Objective
Build up R&D and prototyping facilities in the area of power converters for drives and STATCOM applications. Provide simulation and test facilities. Take up industry projects.
|
| |
|
|
| |
Instruments:
- Digital Storage Oscilloscope
- Hand-held Spectrum Analyzer
- Power Analyzer
- High Precision scope with Signal Analyzer
|
Power Modules:
- 3 Phase IGBT based Inverter Stack
Machines:
- Wound Rotor Induction motor
- 3Phase Transformer
|
|
|
| |
|
|
|
| TOP▲ |
| Anna University |
|
| |
|
Objective
Build up a test platform to enable research work of all types of electrical drives.
|
| |
|
|
| |
Test Beds:
- Three Phase Synchronous Machine
- DC Machine
- Three Phase Induction Machine
- Brushless DC Machine
- Switched Reluctance Machine
|
Instruments:
- Four Channel Power Scope
- AC/DC Signal Source
- 3Phase Harmonic Analyzer
Software Packages:
- CADSTAR
- DSPACE
- DSP
- FPGA Design Tools
|
|
|
| |
|
|
|
| TOP▲ |
| BESU |
|
| |
|
Objective
To provide infrastructure for enabling product oriented Machine drives research in the short term and power quality related issues in the long term.
|
| |
|
|
| |
Instruments:
- Mixed-Signal Oscilloscope
- Hand-held Digital Power Scope
- Variable Voltage Static DC Source
- DC Electronic Load
- Arbitrary Function/Waveform generator
|
Development Tools:
- DSP based M/C training kit
- DSP Evaluation Module F240 platform
- DSP Evaluation Module C6000 platform
Software Packages:
|
Power Conditioners:
- 10 KVA UPQC
- 10 KVA STATCOM
- 10 KVA 4 Quadrant Regenerative drive
|
|
|
| |
|
|
|
| TOP▲ |
|
|
